Event Log Procedures; General Information; To Display The Event Log - First Alert FA1600C User Manual

General Information

The system has the ability to record
various events in a history log wherein
each event is recorded in one of five
categories (listed below), with the time
and date of its occurrence. The Event
Log holds up to 224 events, with the
oldest event being replaced by the
logging of any new event after the log
is full. Using an alpha keypad, the
Event Log can be viewed one category
at a time, or can display all events,
regardless of category (ALL EVENT
LOG). The system also allows selection
of displaying the COMPLETE log, or
only those events occurring since the
last installer service (RECENT). In
addition, events in the other partitions
can be viewed by users authorized to
access those partitions. Note that
events are displayed in chronological
order, from most recent to oldest.
Technical Manuals Online! - http://www.tech-man.com

Event Log Procedures

To Display The Event Log

1. Enter CODE + [#] + [6] + [0]
2. Select the display mode.
RECENT: Displays only those
events occurring since last installer
service.
COMPLETE: Displays complete
event log (up to 224 events).
Press the desired key, 0 or 1.
ENTER 0 = RECENT
1 = COMPLETE
3. Select the partition, 1-8.
Enter the partition number for the
partition whose events are to be
displayed.
Entering 0 (NO) will display all
partitions' events.
SCAN LOG BY PART
0=NO 1-8=PART #
– 53 –