Using #70 Relay Menu Mode; General Information - First Alert FA1600C User Manual

Using #70 Relay Menu Mode

General Information

– 44 –
Technical Manuals Online! - http://www.tech-man.com
Your system may be set up so that certain lights or other devices can
be turned on or off by using the #70 command from either a keypad or
a telephone keypad (if 4285 or 4286 VIP module is used). Ask your
installer if this has been done in your system.
To activate relays from a keypad, enter 4-digit security code + [#]
+70. Follow the keypad prompts described below.
To activate relays using a telephone and 4285 or 4286 VIP
module, first dial the 2-digit phone access code. When the system
acknowledges the access, enter 4-digit security code + [#] + 70. The
following prompts/voice responses will begin.
ENTER DEVICE NO.
00=QUIT 01
NN DEVICE IS OFF
HIT 0=OFF , 1=ON
Voice: "ENTER DEVICE CODE NOW"
Enter the 2-digit number of the device to be
activated.
Note that if an invalid number is entered, the
system will simply ask you to reenter the
number.
Voice: "voice descriptor DEVICE nn ON/OFF.
FOR voice descriptor ON ENTER 1, FOR voice
descriptor OFF ENTER 0"
Press 0 or 1 to turn the device off or on
respectively.
"nn" represents the 2-digit device number and
voice descriptor is the relay voice descriptor
programmed by the installer.