First Alert FA1600C User Manual page 13

10. CHIME KEY: Turns on & off the
CHIME mode. When on, any entry
through a protected delay or
perimeter zone while the system is
disarmed will cause a tone to sound
at the Keypad(s).
11. READY KEY: When depressed
prior to arming the system, the
keypad will display all open
protection zones within the keypad's
home partition. This key is also used
to display all zone descriptors that
have been programmed for your
system, by holding the key down for
at least 5 seconds.
12. # KEY: Permits ARMING of the
system without use of a security
code ("Quick Arm", if programmed).
13. KEYS 0-9: Used to enter your
individual security access code(s).
Technical Manuals Online! - http://www.tech-man.com
Functions Of The Keypad (cont'd)
14. POWER/READY INDICATOR:
(GREEN) On some keypads, this
lights when primary power is on. If
off, system is operating on its
backup battery power. CALL YOUR
INSTALLER IMMEDIATELY. On
other types of keypads, lit indicates
system is ready to be armed, while
unlit indicates system not ready.
15. ARMED INDICATOR: (RED) Lit
when the system has been armed
(STAY, AWAY, INSTANT or
MAXIMUM).
16. INTERNAL SOUNDER: Source of
audible internal warning and
confirmation sounds, as well as
alarms (see "Summary of Audible
Notifications").
17. A-B-C PANIC KEYS: Refer to the
PANIC KEYS section for
descriptions of these keys.
– 13 –