Table of Contents
Advertisement
General
In Case Of Fire Alarm
Silencing A Fire Alarm
Technical Manuals Online! - http://www.tech-man.com
Your fire alarm system (if installed) is on 24 hours a day, providing
continuous protection. In the event of an emergency, the installed
smoke and heat detectors will automatically send signals to your
Control/Communicator, triggering a loud interrupting sound from the
keypad.
An interrupted sound will also be produced by optional
exterior sounders. A FIRE message will appear at your keypad and
remain on until you silence the alarm.
1. Should you become aware of a fire emergency before your
detectors sense the problem, go to your nearest keypad and
manually initiate an alarm by pressing the panic key assigned as
FIRE emergency (if programmed by the installer) and hold down
for at least 2 seconds.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify
your local Fire Department immediately.
4. If no flames or smoke are apparent, investigate the cause of the
alarm. The zone descriptor of the zone(s) in an alarm condition
will appear at the keypad.
1. Silence the alarm by entering your code and pressing the OFF
key. To clear the display, enter your code and press the OFF key
again
Fire Alarm System
– 57 –
Hide quick links:
Advertisement
Table of Contents
