General Information
Your system may be set up so that certain lights or other devices can be
turned on or off by using the #70 command from a keypad. Ask your installer
if this has been done in your system.
To activate relays from a keypad, enter 4-digit security code + [#] +70.
Follow the keypad prompts described below.
NOTE: Your installer may have restricted the use of this function. Please
check with your installer.
ENTER DEVICE NO.
00=QUIT
NN
HIT 0=OFF , 1=ON
NN
HIT THE "✴" KEY
Using #70 Relay Menu Mode
Enter the 2-digit number of the device to be
activated.
01
Note that if an invalid number is entered, the
system will simply ask you to reenter the number.
Press 0 or 1 to turn the device off or on respectively.
DEVICE IS OFF
"nn" represents the 2-digit device number and voice
descriptor is the relay voice descriptor programmed
by the installer.
From a keypad, press ✴ to continue. The ENTER
DEVICE IS OFF
DEVICE NO. prompt will appear.
– 45 –