Assembling The Blades - Hunter TYPE T Installation And Operation Manual

6-1. Attach one blade to a blade iron using four blade assembly screws.
6-2. Slide the blade iron onto the blade iron hub so the bump in the
blade iron aligns with the notch in the hub and the mounting
holes line up with each other.
6-3. Insert a blade iron armature screw into the hole in the blade iron
hub and screw it into the blade iron and hub until it is secure and
the end sticks out of the other side of the blade iron hub.
6-4. Screw a barrel nut onto the end of the blade iron armature screw
to secure it into place. Use a wrench to tighten the nut.
6-5. Install a setscrew into the top of the blade iron hub with the
provided Allen wrench. Tighten the setscrew securely.
6-5. Repeat the above steps for the second blade.
Allen
wrench
Setscrew
Blade Iron Hub
Barrel Nut
6 • Assembling the Blades
Steps 6-3 – 6-4
Blade Assembly
Blade Iron
Armature
Screw
Blade Iron
9
45015-01 • 02/13/08 • Hunter Fan Company
Step 6-1
Blade Iron Hub
Notch
Screws
Mounting Holes
Blade Assembly
Screw
Blade Iron
Bump
Blade Iron
Step 6-2
Blade Assembly
Screw