Hunter TYPE T Installation And Operation Manual
Hide thumbs
Also See for TYPE T:
- Owner's manual and installation manual (18 pages) ,
- Installation and operation manual (15 pages) ,
- Owner's manual (16 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
TYPE T Models
For reference also attach your receipt or a
copy of your receipt to the manual.
42640-01 • 04/04/07
Advertisement
Table of Contents
Related Manuals for Hunter TYPE T
Summary of Contents for Hunter TYPE T
- Page 1 For Your Records and Warranty Assistance Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ TYPE T Models For reference also attach your receipt or a copy of your receipt to the manual. 42640-01 • 04/04/07...
-
Page 2: Table Of Contents
Your Ceiling Fan ....11 use a solid-state speed control with this fan. Use only Hunter speed 9 • Troubleshooting ....12 controls. - Page 3 Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42640-01 • 04/04/07 • Hunter Fan Company... -
Page 6: Assembling The Fan
Assemble securely with three low profile screws. Wire Go to 4 • Hanging and Wiring the Fan. Canopy Step 3-6 (Detail) Trim Ring Adapter Canopy Low Profile Screw Low Profile Washer Low Profile Screw 42640-01 • 04/04/07 • Hunter Fan Company... -
Page 7: Hanging And Wiring The Fan
• The black wire from the ceiling to the black and the black/white wire from the fan 4-5. Push all wires and wire nuts back through the ceiling plate hole into the outlet box. 42640-01 • 04/04/07 • Hunter Fan Company... -
Page 8: Installing The Canopy
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42640-01 • 04/04/07 • Hunter Fan Company... -
Page 9: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. -
Page 10: Installing The Switch Housing
Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch Plug Connector housing with three housing assembly screws. Steps 7-5 – 7-6 Lower Switch Housing Housing Assembly Screw 42640-01 • 04/04/07 • Hunter Fan Company... -
Page 11: Your Ceiling Fan
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 42640-01 • 04/04/07 • Hunter Fan Company... -
Page 12: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 42640-01 • 04/04/07 • Hunter Fan Company...