Hunter Type T Series Owner's Manual And Installation Manual
Hide thumbs
Also See for Type T Series:
- Installation and operation manual (13 pages) ,
- Owner's manual and installation manual (15 pages) ,
- Installation and operation manual (14 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45005-01
20100825
©2010 Hunter Fan Co.
Type T Models
Type T Models
Type T Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter Type T Series
Summary of Contents for Hunter Type T Series
- Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 45005-01 20100825 ©2010 Hunter Fan Co.
- Page 2 90% Pre-Assembled Out Of The Box! Makes Installation Fast and Easy: 1. Install mounting bracket and make wiring connections 2. Attach EasyLock Blades Installation is complete! Please follow the detailed installation instructions inside this manual 45005-01 • 08/25/10 • Hunter Fan Company...
-
Page 3: Table Of Contents
8 • Troubleshooting . . . . . . . . . . . . . . . . . . . . 16 use a solid-state speed control with this fan. Use only Hunter speed use a solid-state speed control with this fan. -
Page 4: Preparing The Fan Site
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. - Page 5 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 45005-01 • 08/25/10 • Hunter Fan Company...
- Page 6 Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
-
Page 7: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 8: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45005-01 • 08/25/10 • Hunter Fan Company... -
Page 9: Assembling And Hanging The Fan
(Rotate the fan until you hear the notch pop into place.) Steps 3-4 – 3-5 Go to 4 • Wiring the Fan . WARNING: Fan may fall if not assembled as directed in these installation instructions. 45005-01 • 08/25/10 • Hunter Fan Company... - Page 10 WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-8 – 3-9 Low Profile Washer Step 3-7 (Detail) Low Profile Washer Adapter Canopy Trim Ring #8-32 x 1/2” Screw Step 3-10 45005-01 • 08/25/10 • Hunter Fan Company...
-
Page 11: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45005-01 • 08/25/10 • Hunter Fan Company... -
Page 12: Installing The Canopy And Canopy Trim
5-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-3 Step 5-4 Canopy Step 5-5 Screw 45005-01 • 08/25/10 • Hunter Fan Company... -
Page 13: Assembling The Blades
6-4. Repeat steps 6-1 through 6-3 until all blades are installed. Open Note: The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. Do not... -
Page 14: Fan
7-5. The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. - Page 15 Hunter fans have the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling The air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7% on energy costs.
-
Page 16: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 1-866-268-1936) or visit us at our website at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy #400 Memphis, Tennessee 38016 45005-01 • 08/25/10 • Hunter Fan Company...
Need help?
Do you have a question about the Type T Series and is the answer not in the manual?
Questions and answers