Page 1
Type T,G,B Models Type T,G,B Models Type T,G,B Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
• To reduce the risk of fire, electrical shock, or motor damage, do not 10 • Troubleshooting ....18 use a solid-state speed control with this fan. Use only Hunter speed controls.
Page 3
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
Page 4
ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 41861-01 • 03/05/2010 • Hunter Fan Company...
Page 5
Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Steps 2-3 – 2-5 Flat Washer 3” Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing towards the ceiling peak. 41861-01 • 03/05/2010 • Hunter Fan Company...
U-shaped hole in the rim. Go to 4 • Securing Fan to Secondary Support System. WARNING: Fan may fall if not assembled as directed in these installation instructions. Step 3-5 U-shaped Hole #8-32 x 1” Screw 41861-01 • 03/05/2010 • Hunter Fan Company...
4-8. Return to the fan so you can complete the fan wiring. Step 4-1 Steps 4-6 – 4-7 Steps 4-2 – 4-3 Steps 4-4 – 4-5 Support Brace Outlet Box Braided Ceiling Cable 41861-01 • 03/05/2010 • Hunter Fan Company...
CAUTION: Be sure no bare wire or wire strands are visible after making connections. 5-6. Push all wires and wire connectors back through the ceiling plate hole into the outlet box. Wire Connector Step 5-4 41861-01 • 03/05/2010 • Hunter Fan Company...
2. Press firmly on opposite sides of the ring towards the canopy. The tabs will flex out releasing the trim ring from the canopy Step 6-3 Steps 6-4 – 6-5 Canopy Screw 41861-01 • 03/05/2010 • Hunter Fan Company...
7 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). Step 7-1 (Detail) 7-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.
8 • Completing Your Installation With or Without a Light Fixture Your Hunter fan comes with an integrated switch housing cap and plug button and an optional light fixture assembly. This feature gives you the option of installing the fan with OR without the included light fixture.
Page 14
Housing to a maximum of 190 Watts. Exceeding that limit or the Assembly Screw marked limit on this product may result in fire hazard or improper operation.the troubleshooting section 41861-01 • 03/05/2010 • Hunter Fan Company...
Page 15
6. Connect the plug connectors between the two white wires. 7. Connect the plug connectors between the black wire and black/white wire. Threaded Rod Male Dummy Terminal Female Dummy Terminal Steps 3 – 5 41861-01 • 03/05/2010 • Hunter Fan Company...
Page 16
Light Bulbs (60 Watt Maximum) through the finial and screw the finial onto the threaded rod end Metal Rod until tight. Metal Disk Pull Chain Glass Bowl Breakaway Connector Cover Plate Finial 41861-01 • 03/05/2010 • Hunter Fan Company...
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 41861-01 • 03/05/2010 • Hunter Fan Company...
Wait 30 seconds, then resume power to the fan. If you need parts or service assistance, please call 866-268-1936 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 41861-01 • 03/05/2010 • Hunter Fan Company...
Need help?
Do you have a question about the T and is the answer not in the manual?
Questions and answers