REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
1
Set the vacuum cleaner to the
parallel position and turn it over.
2
Use a Philips screwdriver to loosen
the screw on the bottom plate and
slide the latch in the direction of the arrow.
3
Lift the bottom plate off.
REATTACHING THE BOTTOM PLATE
1
Insert the projection on the bottom plate
into the groove on the nozzle housing
and set the bottom plate in place.
Turn the vacuum over
3
and place in the upright position.
15
Latch
Mounting
screw
Bottom Plate
Projection
Groove
Loosen
Screws
Loosen
Screw
2
Re-tighten the screw by using a Philips
screwdriver and s lide the latch in the
direction indicated by the arrow.
Tighten
Screws
Tighten
Screw
Latch
Loosen
Screw
Tighten
Screw