REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
1
Set the vacuum cleaner to the
parallel position and turn it over.
2
Slide the latch in the direction
of the arrow.
3
Remove the bottom plate by pulling
the tabs as illustrated.
REATTACHING THE BOTTOM PLATE
1
Insert the projection on the bottom plate
into the groove on the nozzle head
and set the bottom plate in place.
Slide the latch in the direction shown.
3
Latch
Bottom Plate
Projection
Groove
Latch
2
Push the bottom plate as shown.
Press
Turn the vacuum over and place in the
4
upright position.
Height Adjustment Lever
Pull here
Bottom Plate
Press
Nozzle Head
14