Edge Cleaning - Fantom FM788HB Instruction Manual

USING THE VACUUM CLEANER
HEIGHT ADJUSTMENT LEVER
Height Adjustment Lever
The nozzle head can be
adjusted to four different
height settings.
RUG/FLOOR (TOOLS)SELECTOR
The RUG/FLOOR(TOOLS)selector should only be
adjusted while the vacuum cleaner is turned on
and in the upright position.
1
When cleaning a rug or carpet,first
turn the ON/OFF switch to the ON
position,and then set the RUG/
FLOOR(TOOLS)selector to the
RUG position.
2
When cleaning a bare floor or when using
one of the attachments,set the RUG/FLOOR
(TOOLS)selector to the FLOOR position.
Caution: Do not change the setting of the RUG/FLOOR(TOOLS)selector while the vacuum
cleaner is turned off.

EDGE CLEANING

This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges
near baseboards and stationary furniture.
LOW
Set the height adjustment to the
Carpet
appropriate carpet length.
HIGH
TURN OFF BRUSH ROLL
Bare Floor/Tools
WHEN USING TOOLS.
Caution:
Before using the height adj-
ustment lever,please make
sure the nozzle head is tilted
backward from the floor.
Nozzle Head
Rug/Floor (Tools)
SELECTOR
7