Troubleshooting; Replacement Parts - Fantom FM788HB Instruction Manual

TROUBLESHOOTING

If there is a problem with the vacuum cleaner, carry out the following checks
to find the cause. If the problem still persists after the checks have been made,
do not use the vacuum cleaner to prevent the possibility of an accident occurring.
Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the
wall outlet, and contact FANTOM Customer Service at 1-800-275-9251.
Problem
The motor does not operate
when the ON/OFF switch is
set to the "ON" position.
Suction force is weak.
The agitator does not
operate.
TO ORDER REPLACEMENT FILTERS CALL 1-800-275-9251
9BF-D-P111-01600 0506-
E
17
Cause
The power cord plug is not
securely inserted into the
wall outlet.
The dust compartment is full.
The suction hose is blocked.
The nozzle head is blocked.
The filters are dirty.
The nozzle air inlet pipe is
blocked.
The bypass vavle is opened.
The flat belt is worn or
broken.
R emedy
Insert the power cord plug
securely into the wall
outlet.(refer to page 5)
Empty the dust compartment.
(refer to page )
10
Remove the blockage.
(refer to page 12)
Remove the blockage.
(refer to page 12)
Clean the filters.
(refer to page 11)
(refer to page 16)
Remove the blockage.
(refer to page 12)
Remove the blockage.
(refer to page 12)
Replace the flat belt.
(refer to page 14)