REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
1
Set the vacuum cleaner to the
parallel position and turn it over.
2
Slide the latch in the direction
shown.
3
Remove the bottom plate by pulling
the tabs as illustrated.
REATTACHING THE BOTTOM PLATE
1
Insert the projection on the
bottom place into the groove
on the nozzle head and set
the bottom plate in place.
Bottom Plate
3
Slide the latch in the direction shown.
Latch
Pull here
PULL
Bottom Plate
2
Push the bottom plate as shown.
Projection
Groove
4
Turn the vacuum over and place in the
upright position.
Press
Press
Latch
15