Mac Address Filter - D-Link DIR-505 User Manual

Section 3 - Router Mode
Use MAC (Media Access Control) Filters to control access to your network based on the MAC addresses of connected clients.
You can set MAC address iltering to only allow the listed MAC addresses to connect, or block access to all listed MAC addresses.
After making your changes, click the Save Settings button.
Wireless
Conigure how MAC iltering works by using the dropdown
Access box to select an option:
Settings:
Turn MAC Filtering OFF: This disables MAC iltering.
Turn MAC Filtering ON and ALLOW computers listed to
access the network: When this option is selected, only PCs
and devices with MAC addresses in the MAC Address List are
granted network access. All other devices will be blocked.
Turn MAC Filtering ON and DENY computers listed to
access the network: When this option is selected, all PCs
and devices with MAC addresses in the MAC Address List
will be refused access to your network. All other devices will
be allowed access.
MAC Address: Enter the MAC addresses you would like to ilter. You can
select a client currently connected to your access point
from the Wireless Client List drop-down menu and then
click the corresponding << button ill in the MAC address
automatically. Click the Clear button to remove any entered
MAC address.
D-Link DIR-505 User Manual

MAC Address Filter

53