Lan Setup - D-Link DIR-505 User Manual

Section 6 - Wi-Fi Hot Spot Mode
This section will allow you to change the local network settings of the DIR-505 and to conigure the DHCP settings. After making
your changes, click the Save Settings button.
Device Name: Enter the Device Name of the DIR-505. It is recommended
that you change the Device Name if there is more than one
D-Link device in your subnet.
Dynamic IP
(DHCP) LAN
Connection
Here, you can edit the IP Address, Subnet Mask, and Local
Type: Domain Name for the DIR-505 to use.
DHCP Server Ticking the Enable DHCP Server checkbox allows the DIR-
Settings:
505 to assign IP addresses to the devices on your network. by
using DHCP. You can set the range of allowable IP addresses
using the DHCP IP Address Range text boxes, and you can
set the DHCP Lease Time with the corresponding text box.
D-Link DIR-505 User Manual

LAN Setup

121