Setting Up With A Web Browser - D-Link DIR-505 User Manual

Section 2 - Installation
1. Move the switch on the top of the DIR-505 to the mode you
wish to use, then plug it in. Verify that the power LED has
turned green before continuing.
If you are using Router/AP Mode:
Move the switch on the top of the DIR-505 to Router/AP and
plug it into a wall outlet near your cable/DSL modem or router.
Connect one end of the Ethernet cable into the Ethernet port
of your cable/DSL modem or router and then plug the other
end of the cable into the Ethernet port of the DIR-505. Verify
that the power LED has turned green before continuing.
2. On your mobile device, go to your Wi-Fi settings and connect to
the network (SSID) that is displayed on the Wi-Fi Coniguration
Card included in your package. The "XXXX" in the SSID will be
the last four digits of the MAC Address. (example SSID: dlink-
a8fa) Then, enter the Wi-Fi password also printed on the Wi-Fi
Coniguration Card (ex: akbdj1936).
D-Link DIR-505 User Manual

Setting Up With a Web Browser

Charger
Router/AP
Repeater
Wi-Fi
Hotspot
Outlet
17