Advanced Wireless - D-Link DIR-505 User Manual

Section 3 - Router Mode
This screen allows you to set various advanced wireless settings of your DIR-505. Unless you are experiencing speciic problems,
it is recommended that you leave these settings at their default values. After making your changes, click the Save Settings
button.
Transmit Power: Use the dropdown box to set the transmit power of the
antennas.
WMM Enable:
WMM is Quality of Service(QoS) for your wireless network.
This will improve the quality of video and voice applications
for your wireless clients.
Short GI:
Check this box to reduce the guard interval time therefore
increasing the data capacity. However, this may create a less
reliable connection and may create higher data loss.
IGMP Snooping:
Tick this checkbox to enable this feature.
WLAN Partition:
This enables 802.11d operation. 802.11d is a wireless
speciication developed to allow implementation of wireless
networks in countries that cannot use the 802.11 standard.
This feature should only be enabled if you are in a country
that requires it.
HT 20/40 Enable this option to reduce interference from other
Coexistence: wireless networks in your area. If the channel width
is operating at 40MHz and there is another wireless
network's channel over-lapping and causing interference,
the router will automatically change to 20MHz.
D-Link DIR-505 User Manual

Advanced Wireless

56