Wps/Wcn 2.0 - D-Link DIR-505 User Manual

Section 7 - Connecting a Wireless Client

WPS/WCN 2.0

The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista®. The following instructions for setting this up
depends on whether you are using Windows Vista® to conigure the router or third party software.
When you irst set up the router, Wi-Fi protection is disabled and unconigured. To enjoy the beneits of Wi-Fi protection, the
router must be both enabled and conigured. There are three basic methods to accomplish this: use Windows Vista's built-in
support for WCN 2.0, use software provided by a third party, or manually conigure.
If you are running Windows Vista®, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the
Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PIN
button or Reset PIN to Default button.
If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are inished, proceed
to the next section to set up the newly-conigured router.
D-Link DIR-505 User Manual 146