Maintenance - Maytag MGR4410B User Manual

Maintenance

Oven Door
CAUTION:
•
Do not place excessive weight on or stand on an open
oven door. This could cause the range to tip over,
break the door, or injure the user.
•
Do not attempt to open or close door or operate oven
until door is properly replaced.
•
Never place fingers between hinge and front oven
frame. Hinge arms are spring mounted. If acciden-
tally hit, the hinge will slam shut against oven frame
and could injure your fingers.
To remove:
1. When cool, open the oven door
to the first stop position (opened
about four inches).
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
To replace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door
is completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
NOTE: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
Oven Window
(select models)
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may
scratch the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or
other objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of breakage
at a later date.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Oven Light
CAUTIONS:
•
Disconnect power to range before replacing light bulb.
•
Use a dry potholder to prevent possible harm to hands
when replacing bulb.
•
Be sure bulb is cool before touching bulb.
•
Do not touch hot bulb with a damp cloth as this may
cause the bulb to break.
To replace oven light bulb:
1. Remove light bulb.
2. Replace with a 40 watt appliance bulb.
3. Reconnect power to range. Reset clock.
Leveling Legs
CAUTION:
•
Be sure the anti-tip bracket secures one of the rear
leveling legs to the floor to prevent the range from
accidentally tipping.
The range should be leveled when installed. If the
range is not level, turn the plastic leveling legs,
located at each corner of the range, until
range is level.
Electrical Connection
Appliances which require electrical power are equipped
with a three-prong grounding plug which must
be plugged directly into a properly grounded
three-hole 120 volt electrical outlet.
Always disconnect power to appliance be-
fore servicing.
The three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE
THIRD GROUNDING PRONG FROM THE POWER
CORD PLUG.
If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility of the appli-
ance owner to have the outlet replaced with a properly
grounded three-hole electrical outlet.
12
ANTI-TIP BRACKET
LEVELING LEG