Care And Cleaning - Maytag MGR4410B User Manual

Care & Cleaning
Parts Cleaning Procedure
Metal Finishes •
- Trim parts •
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Oven Interior •
•
•
•
To make cleaning easier, remove the oven door, if desired. (See Maintenance section,
page 12.)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Oven Racks •
•
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Plastic Finishes •
- Door handles •
- Backguard trim
- End caps NOTE: Never use oven cleaners, abrasive or caustic liquid or powdered cleansers on plastic
finishes. These cleaning agents will scratch or mar finish.
NOTE: To prevent staining or discoloration, wipe up fat, grease or acid (tomato, lemon,
vinegar, milk, fruit juice, marinade) immediately with a dry paper towel or cloth.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sealed Gas •
Burners
•
•
•
* Brand names are registered trademarks of the respective manufacturers.
(continued)
Cleaning Chart -- continued
Wash with soap and water, a glass cleaner, or mild liquid sprays.
To prevent scratching or dulling of the finish, do not use mildly abrasive, abrasive, harsh or
caustic cleaners such as oven cleaners.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Clean frequently using mild abrasive cleaners and a plastic pad.
Do not use metallic scouring pads because they will scratch the surface.
When using commercial oven cleaners follow the manufacturer's instructions.
Wipe up acid spills (tomato or milk based foods) as soon as possible with soap and water.
If the spill is not wiped up, it may discolor the porcelain.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Clean with soapy water.
Remove stubborn soil with cleansing powder or soap-filled scouring pad. Rinse and dry.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
When cool, clean with soap and water, rinse and dry.
Use a glass cleaner and a soft cloth.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Allow burner to cool. Wash with soapy water and a plastic scouring pad. For stubborn soils,
clean with a soap-filled, nonabrasive pad or a sponge and a commercial Cooktop Cleaning
Creme. (Call 1-800-688-8408 to order Part #20000001.)
Clean gas ports with a straight pin especially the port below the ignitor. Do not enlarge or
distort holes.
Be careful not to get water into burner ports.
When cleaning, use care to prevent damage to the ignitor. If the ignitor is soiled, wet or
damaged the surface burner will not light.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
11
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○