Controls At A Glance - Maytag MGR4410B User Manual

Controls at a Glance

Clock and Timer Control
NOTE: The display will flash when electrical power is first supplied to the appliance or if there has been a power
failure.
To Set the Clock:
1. Press the CLOCK pad.
• A beep will sound when the CLOCK pad is pressed.
2. Press or press and hold the
time of day appears in the display.
• Press to change the time in one minute increments.
• Press and hold to change the time in 10 minute increments.
To recall the time of day when the timer operation is displayed,
press the CLOCK pad.
To Set the Timer:
The timer can be set from one minute (0:01) up to 12 hours
(12:00). The timer does NOT control the oven.
1. Press the TIMER pad.
• A beep will sound when the TIMER pad is pressed.
• 0:00 will appear in the display.
1 1 : 35
or pad until the correct
5
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2. Press or press and hold the
correct time appears in the display.
• Press to change the time in one minute increments.
• Press and hold to change the time in 10 minute
increments.
• The timer will start automatically after a few
seconds. The flashing colon indicates that the
timer is in use.
• If the CLOCK pad is pressed, the colon will
continue to flash to indicate the timer is in use.
3. A beep will sound at one minute (0:01).
4. At the end of the timer operation, 0:00 will appear
in the display and three beeps will sound.
• One beep will sound every 10 seconds for 10
minutes or until the timer operation is cancelled.
To Cancel the Timer:
Press the TIMER pad and the current time of day will
reappear in the display.
NOTE: When 0:00 is displayed, pressing either the
TIMER or CLOCK pad will also cancel the timer op-
eration.
or pad until the