Step Six: Enter Contacts; Step Seven: Create E-Mail Messages - Extron electronics IPL T PC1 Setup Manual

Software Setup, cont'd

Step Six: Enter contacts.

The Contact Manager dialog box is used to enter the name,
e-mail address, and company name of the network's contacts.
To enter contact information,
1. From the Edit menu, select Contact Manager... .
2. On the Contact Manager window, complete the Name,
Email, and Company fields for your contact.
3. Click Add. The contact information is added (see
4. Repeat steps 2 and 3 for any desired additional contacts.
5. When finished, click OK to close the window.
IPL T PC1 Interface • Software Setup
3-10
d
).

Step Seven: Create e-mail messages.

The Email Manager dialog box is used to create e-mails that are
delivered according to instructions that you set up in the GC
Schedule and Monitor windows.
1. From the Edit menu, select Email Manager... .
2. For each e-mail message, complete the Name, Subject, and
Body (message content) fields.
3. Click Add.
IPL T PC1 Interface • Software Setup 3-11