Step Two: Create A New Project - Extron electronics IPL T PC1 Setup Manual

Software Setup, cont'd

Step Two: Create a new project.

To create a new Global Configurator project file,
1. From the File menu, select New.
The Start Options dialog box opens.
2. Select Create a New Project.
3. Click OK.
The Project Settings dialog box opens (see the illustration
on the next page).
4. In the Next Assigned IP Address field, type in the IP
address of the first device that you want to add to your GC
project file.
IPL T PC1 Interface • Software Setup
3-4
5. Make the desired date/time selections.
6. Click OK. The Add Device dialog box opens.
You can edit these settings during a GC2.3 session by
selecting Project Settings... from the Edit menu to
display this dialog box.
IPL T PC1 Interface • Software Setup 3-5