Hangar 9 P-51 Mustang ARF Assembly Manual page 53


Step 7
Turn on your radio system. Move the control on the
transmitter to the up position. Attach the servo arm and
secure it with the screw provided with the servo. The
servo arm should be offset towards the leading edge of
the wing as shown in the photo. Attach the flap linkage
to the flap servo arm.
Section 23: Adding a Flap Servo

Step 8
Check the operation of the flaps from the radio system.
The flaps will now move from up to a lowered position
using the radio system.
53