Requirements; Connecting To A Microsoft Windows Nt 4.0 Server; Procedure - HP 3COM ETHERLINK III 3C900-B Installation Manual

Microsoft Windows 98
nd
2 edition

Connecting to a Microsoft Windows NT 4.0 Server

Microsoft Windows 98 2nd edition
9 Connecting to a Microsoft Windows NT 4.0 Server

Requirements

Operating System
Driver Version
Driver File
Server OS
Client OS

Procedure

1 With the HP Vectra turned off, install the network adapter into a PCI slot.
2 Connect the network cable to the newly installed network adapter.
3 Power on the machine and boot to Windows 98.
4 Windows 98 will detect the network adapter as "3Com EtherLink XL
COMBO 10Mb Ethernet NIC (3C900B-COMBO)" during start up and
install the OS embedded driver.
5 Click on "Yes" when Windows 98 prompts to restart the system.
6 After restarting the system, additional changes in the network properties,
such as: workgroup name, computer name, etc. may be necessary. Ask
your Network Administrator for more information. Restart the system if
changes are made.
14
nd
Windows 98 2 edition
3.41.50
El90x.sys
Windows NT 4.0 Server
Microsoft