Procedure - HP 3COM ETHERLINK III 3C900-B Installation Manual

Hewlett-packard network card user manual
Table of Contents

Advertisement

Microsoft Windows 98
nd
2
edition
10 Connecting to a Novell NetWare 4.11 Server
Requirements
Operating System
Driver Version
Driver File
Server OS
Client OS

Procedure

1 With the HP Vectra turned off, install the network adapter into a PCI slot.
2 Connect the network cable to the newly installed network adapter.
3 Power on the machine and boot to Windows 98.
4 Windows 98 will detect the network adapter as "3Com EtherLink XL
COMBO 10Mb Ethernet NIC (3C900B-COMBO)" during start up and
install the OS embedded driver.
5 Click on "Yes" when Windows 98 prompts to restart the system.
6 After restarting the system, additional changes in the network properties,
such as: workgroup name, computer name, etc. may be necessary. Ask
your Network Administrator for more information. Restart the system if
changes are made.
7 From the location of the "Novell Client v3.1 for Windows 95/98"
installation files, execute "Setup.exe".
8 Click on "Yes" to accept the "Novell Terms and Conditions".
9 Select either "Typical" or "Custom" and click on "Install". Typical
Installation is normally chosen. Select Custom Installation only if you are
an administrator or an advanced user. When prompted for options during
installation, ask your Network Administrator for more information.
10 Click on "Reboot" once the installation is complete.
Connecting to a Novell NetWare 4.11 Server
nd
Windows 98 2
edition
3.41.50
El90x.sys
Novell NetWare 4.11 Server
Client v3.1 for Windows 95/98
Microsoft Windows 98 2nd edition
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vl600 - vectra - 128 mb ram

Table of Contents