Table of Contents
Advertisement
Connecting to a Microsoft Windows NT 4.0 Server
Microsoft Windows NT 4.0 Workstation
12 Select all the applicable network protocols and click on "Next".
13 At the "Network Services:" prompt, accept the default settings and click
on "Next".
14 Complete the network card installation by clicking on "Next".
15 Type in the path to your Windows NT files and click "Continue".
16 If TCPIP was one of the protocols selected, you will be prompted for some
TCPIP information. Your Network Administrator can provide you with
this information.
17 Accept the default entries at the "Show Bindings for:" windows and click
on "Next".
18 When "Windows NT is now ready to start the network..." window appears,
click on "Next".
19 Specify your Computer Name, Workgroup or Domain Name and click
inexact".
20 Click on "Finish" when the "Network has been installed on this computer"
message appears.
21 Remove the driver disk and select "Yes" when prompted to restart your
computer.
22 Log onto Windows NT Workstation with administrator privileges and re-
install the current service pack.
10
Advertisement
Table of Contents
