Microsoft Windows Nt 4.0 Workstation Requirements; Procedure; Connecting To A Novell Netware 4.11 Server - HP 3COM ETHERLINK III 3C900-B Installation Manual

Microsoft Windows NT
4.0 Workstation

7 Connecting to a Novell NetWare 4.11 Server

Requirements
Operating System
Driver Version
Driver File
Server OS
Client OS

Procedure

1 With the HP Vectra turned off, install the network adapter into a PCI slot.
2 Connect the network cable to the newly installed network adapter.
3 Power on the machine and boot to Windows NT.
4 Log into Windows NT with administrator privileges.
5 The following steps are based on a first-time installation of Networking on
the system. Adding a NIC to a previously installed Networking has some
minor differences. Ask your administrator for more information.
6 Open the "Network Properties" windows and agree to install "Windows
NT Networking".
7 With "Wired to the Network" checked, click on "Next".
8 Click on the option to "Select from list..." then on "Have Disk..."
9 Insert the driver disk and click on "OK".
10 With "3Com EtherLink/Etherlink XL PCI Bus Master NIC" highlighted,
click on "OK".
11 With the "3Com EtherLink/Etherlink XL PCI Bus Master NIC" listed in the
"Network Adapters:" window, click on "Next".
12 Select all the applicable network protocols and click on "Next".
Connecting to a Novell NetWare 4.11 Server
Microsoft Windows NT 4.0 Workstation
Windows NT 4.0 Workstation
3.40.40
El90xnd4.sys
Novell NetWare 4.11 Server
Client v4.6 for Windows NT
11