Connecting To A Novell Netware 5.0 Server; Microsoft Windows Nt 4.0 Workstation; Requirements; Device Configuration - HP VL600 - Vectra - 128 MB RAM Installation Manual

Microsoft Windows NT
4.0 Workstation

Connecting to a Novell NetWare 5.0 Server

Microsoft Windows NT 4.0 Workstation

5 Connecting to a Novell NetWare 5.0 Server

Requirements

Operating System
Driver Version
Driver File
Server OS
Client OS

Device Configuration

Device
Configuration 1
Configuration
Interrupt 5
I/O Address 300-30F

Procedure

1 With the HP Vectra turned off, install the network adapter into an ISA slot.
2 Connect the network cable to the newly installed network adapter.
3 Power on the machine and boot to Windows NT.
4 Log into Windows NT with administrator privileges.
5 The following steps are based on a first-time installation of Networking on
the system. Adding a NIC to a previously installed Networking has some
minor differences. Ask your administrator for more information.
6 Open the "Network Properties" windows and agree to install "Windows
NT Networking".
7 With "Wired to the Network" checked, click on "Next".
8 Click on the option to "Select from list..." then on "Have Disk...".
9 Insert the driver disk and click on "OK".
10
Windows NT 4.0 Workstation
5.26.45
Elnk3nd4.sys
Novell NetWare 5.0 Server
Client v4.6 for Windows NT
Configuration 2
11
210-21F