Appendix I - Specifications - Pride STYLUS LS Owner's Manual

A P P E N D I X I - S P E C I F I C A T I O N S
Seat Dimensions:
Back Height:
Seat Upholstery:
Seat-to-Floor Height
Caster Wheels:
Axle Mount:
Caster Fork:
Maximum Safe Slope:
1
Turning Radius:
1
Overall Size:
Weight Capacity:
Component Weight:
Armrests:
Front Riggings:
Wheel Locks:
Frame Finish:
Accessories:
Static Stability Forward (Wheels Locked)
Static Stability Rearward (Wheels Locked)
Wheel Lock Operational Force
1
Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or – ) 3%.
2
Test results for Stylus LS equipped with push-to-lock wheel locks in accordance with ANSI-RESNA WC Vol. 2 Section 03. Max-
imum operating force for hand operated wheel locks is 60N (+ or – ) 10%. Operational force can vary based on tire type, manufac-
ture, and condition.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series
EN12183 standards. All specifications subject to change without notice.
28
STYLUS LS SPECIFICATIONS
16 in. x 16 in., 16 in. x 18 in., 18 in x 16 in., 18 in. x 18 in., 20 in. x 16 in., 20 in. x 18 in.
17-19 in. (43.18-48.26 cm)
Adjustable tension
See figure 13.
5 in. (12.70 cm), 6 in. (15.24 cm), or 8 in. (20.32 cm)
3-position
3-position axle; short fork
5° (8.7%)
See figure 28.
Length: See figure 28.
Width: See figure 28.
250 lbs. (113.4 kg)
Base: 32.5 lbs. (14.74 kg) without front riggings
Flip-back, desk-length; Height-adjustable, desk or full length
Swing-away foot rests, Elevating leg rests
Push-to-lock or pull-to-lock
Silver Vein
Anti-tip wheels; oxygen tank holder; wheel lock extension
10°
14° (without oxygen tank and holder); 13° (with oxygen tank and holder)
Left: 60N Right: 60N
2
www.pridemobility.com Stylus LS