Pride STYLUS LS Owner's Manual page 21

I V . C O M F O R T A D J U S T M E N T S
Seat Angle (Dump)
The position of the caster wheels affects the angle
(dump) of the seat. By changing the location of the
caster wheel on the fork, you change the seat angle.
See figure 23.
NOTE: You can also adjust the seat angle by raising
or lowering the drive wheel. See "Drive Wheel Posi-
tion."
To change the seat angle:
1. Remove the hardware that fastens the caster
wheel to the caster fork.
2. Reposition the caster wheel on the caster fork.
3. Reinstall the hardware that fastens the caster
wheel to the caster fork.
4. Repeat the procedure for the other side, making
sure both caster wheels are adjusted to the same
position.
WARNING! Changing the seat angle
may adversely affect stability and
cause the wheelchair to tip over.
NOTE: Changing the seat angle may require a
change in caster angle. See "Caster Angle."
Stylus LS
CASTER
WHEEL
Figure 23. Caster Wheel Position
www.pridemobility.com
CASTER FORK
21