Table of Contents
Advertisement
A P P E N D I X I - S P E C I F I C A T I O N S
Suspension
Drive Wheels
Castor Wheels
Anti-tip Wheels
1
Maximum Speed
Brakes
2
Ground Clearance
2
Turning Radius
2
Overall Size
Drivetrain
3
Batteries
1,4
Range
Battery Charger
Weight Capacity
Component Weights
Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery
1
condition, motors, controller type, tyre type and tyre condition. This specification can be subject to variance
of (+ or – ) 10%.
Due to manufacturing tolerances and continued product improvement, this specification can be subject to
2
variance of (+ or – ) 3%.
AGM or Gel-Cell type required. See VI. "Batteries and Charging."
3
Tested in accordance with ASNI/RESNA, WC Vol 2, Section 4 and ISO 7176-4 standards. Results derived
4
from theoretical calculation based on battery specifications and drive system performance. Test conducted
at maximum weight capacity.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series
EN12184 standards. All specifications subject to change without notice.
Athena
SPECIFICATIONS
Full Suspension - Sport Trac
35.5 cm (14 in.), centre-mounted, pneumatic or solid available
25.4 cm (9 in.), front articulating, pneumatic and solid available
10 cm (4 in.) solid, rear-mounted
Up to 10.46 km/h (6.5 mph)
"Intelligent Braking" electronic regenerative, disc park brake
See figure 19.
See figure 19.
Length: See figure 19.
Width: See figure 19.
Two motor, rear-wheel drive
Two 12-volt 70 Ah Group 24 batteries
Up to 23.57 km (14.65 miles)
Off-board
136 kg/21 stone/300 lbs.
Base: 65.32 kg (144 lbs.)
Batteries: 24 kg (53 lbs.) each
www.pridemobility.com
35
Advertisement
Table of Contents
