Precor P80 Operating And Maintaining page 87

Installing the Console
Table 1. P80 internal cable connections
Cable
Ethernet (LAN)
TV in
Power with splitter
cable
Data from base unit
Heart rate sensors
Safety key
(treadmills only)
CSAFE
Auto Stop sensor
(treadmills only)
To simplify installation and maintenance, route and connect
cables 1 through 5 according to the following instructions.
Note: In the illustrations in this section, some cables are
omitted for the sake of clarity.
Connector Type
Eight-contact modular, on
round black cable
F-type coaxial
Two-contact plug,
polarized and latched
Eight-contact modular, on
flat gray cable
Four-contact strip, keyed
Six-contact strip, keyed
Eight-contact modular, on
flat gray cable
Four-contact strip, keyed
29
Circuit
Connector
Location