Using A Chest Strap Transmitter - Precor P80 Operating And Maintaining

Introducing Users to the P80 Console

Using a Chest Strap Transmitter

WARNING
Wearing a chest strap transmitter during your workout
provides steady heart rate information. For the equipment to
detect your heart rate, you must grip the touch heart rate
sensors or wear a chest strap transmitter while exercising. In
the presence of both touch and wireless data, the touch data
takes precedence and will display.
Note: To receive an accurate reading, the strap needs to be in
direct contact with the skin on the lower sternum (just below
the bust line for women).
To use a chest strap transmitter:
1.
2. Adjust the strap and fasten it around your chest. The
3. Make sure that the chest strap is right-side-up, lies
4. Test the chest strap placement by checking the heart rate
Signals used by the Chest Strap Transmitter
(or heart rate strap) may interfere with
pacemakers or other implanted devices.
Consult your physician and the manufacturers
of your Chest Strap Transmitter and implanted
device before using a Chest Strap Transmitter.
Carefully dampen the back of the strap with tap water.
Important: Do not use deionized water. It does not have the
proper minerals and salts to conduct electrical impulses.
strap should feel snug, not restrictive.
horizontally across, and is centered in the middle of your
chest.
function on the equipment. If a heart rate is registering,
your chest strap placement is correct. If the equipment
does not register a heart rate, readjust the strap and
recheck the heart rate function.
37