Internal Battery Packs; Removable Power Distribution Box; Figure 3 Internal Battery Pack With Connector; Figure 4 Pd2-Ce5Hdwrmbsu - Emerson Liebert GXT3 User Manual

3.2

Internal Battery Packs

The UPS has two internal battery packs behind a battery access door on the front of the unit. Each
internal battery pack is fitted with a connector to link to the UPS.
Figure 3 Internal battery pack with connector
Liebert GXT3 10,000
Battery Pack shown;
5000VA battery pack
has same features
3.3

Removable Power Distribution Box

The UPS arrives with a power distribution pack installed. This box always contains the UPS input
circuit breaker.
Figure 4 PD2-CE5HDWRMBSU
Outer Surface View Power Distribution Box
PD2-CE5HDWRMBSU
NOTE
Hardwire and hardwire/receptacle boxes that include a manual bypass switch allow
AC power to continue to flow from the mains input to the load while the box is removed
from the UPS. For details, refer to 5.3 - Connect Input/Output Power.
Battery Handle
Battery Connector
Front of Battery Pack
8
Major Components
Quick-Connect