Input Label; Image Position; Position - Sharp Aquos LC-32PD5X Operation Manual

Useful adjustment settings

Input Label

You can assign each input source a label you like.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press a / b to select "Input Label", and then
4
press ENTER.
Press a / b / c / d to select each character of
5
the new name for the input source, and then
press ENTER.
DVD
A B C D
K L M N
U V W X
0 1 2 3 4 5 6 7 8 9
Repeat until the name is fully spelt out.
6
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select "END", then press
ENTER to exit from the labelling menu.
INPUT SOURCE
TV
DTV
NOTE
• You cannot change labels if the input source is TV or DTV.
E F G H I J CLEAR
O P Q R S T BACK
Y Z + – . _
END
(Example)
INPUT1
INPUT2
DVD
(Example)

Image position

For adjusting a picture's horizontal and vertical

position.

Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Position", and then
3
press ENTER.
Press a / b to select "H-Pos." or "V-Pos.".
4
a10
H-Pos. [ 0]
V-Pos. [ 0] a20
Reset
Selected item
H-Pos. Centres the image by moving it to the left
or right.
Centres the image by moving it up or
V-Pos.
down.
Press c / d to adjust the item to your desired
5
position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a / b to select "Reset", and then press
ENTER.
• Adjustments are stored separately according to input
source.
b10
b20
Description
37