Audio Only; Dnr (Digital Noise Reduction); Hdmi Setup; Dnr - Sharp Aquos LC-32PD5X Operation Manual

Useful adjustment settings

Audio Only

When listening to music from a music programme, you
can set the display off and enjoy audio only.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Audio Only", and then
3
press ENTER.
Press c / d to select "On", and then press
4
ENTER.
Selected item
On Audio is output without screen image.
Off Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to "Off".

DNR (Digital Noise Reduction)

Produces a clearer video image.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "DNR", and then press
3
ENTER.
Press a / b to select the desired level, and
4
then press ENTER.
40
Description
Off
High
Low

HDMI Setup

HDMI (High-Defi nition Multimedia Interface) terminal
selection.
To watch an HDMI equipment image, select
1
"INPUT3" using TV/VIDEO on the remote
control unit or on the TV.
Press MENU and the MENU screen displays.
2
Press c / d to select "Option".
3
Press a / b to select "HDMI Setup", and then
4
press ENTER.
• The HDMI Setup can be selected only when
"INPUT3" is selected.
[ Option ... HDMI Setup ]
MENU
Option

Audio Only

DNR

HDMI Setup

Press a / b to select the desired item, and
5
then press ENTER.
HDMI Setup Selectable
items
items
Signal RGB/
Type YCbCr4:4:4/
YCbCr4:2:2
Auto View Enable/
Disable
Audio Digital/
Select Analogue
Press a / b / c / d to select the desired setting,
6
and then press ENTER.
NOTE
• Refer to your external equipment operation manual for the
signal type.
• Item under "Signal Type" can be selected when the
equipment is connected with a DVI-HDMI conversion cable.
• When the equipment is connected with an HDMI cable,
items are automatically set and cannot be selected.
[Off]
Description
Select the video signal type
from the HDMI terminal.
Set whether or not to use
WIDE MODE based on signal
recognition, including an HDMI
signal.
Select "Digital" for audio signal
via the HDMI terminal.
Select "Analogue" for audio
signal via the AUDIO jack.