Setting The Calibrations - Toshiba e-Studio 3510C User Functions Manual

Setting the Calibrations

This equipment allows you to calibrate the color gradation for copy and print.
The copy calibration setting in the [USER] menu can be configured only when an administra-
tor has set the Calibration Display Level to [USER].
P.124 "Setting the Calibration and Registration Display Level"
When the private print jobs, schedule print jobs, or invalid jobs are stored in the job list, the
calibrations cannot be performed. In that case, delete the jobs in the job list.
This function allows the machine automatically to calibrate the color gradation for copy and print-
ing jobs when the color cannot be adjusted well because the shading or the hue of the image
has deviated.
Set the LT-sized or A4-sized paper (recommended paper) in the cassette before starting the
calibration. If any other paper is used, calibration may not be performed properly.
If the color often deviates, call your service technician.
If the glass is dirty or any foreign objects are stuck to the glass, the calibration may not be
carried out properly. Keep the glass clean.
Never raise the original cover or the optional Automatic Document Feeder, or open the front
cover while the calibration is in progress. If this does happen, the calibration cannot be fin-
ished appropriately.
Interrupt copying is not available during the calibration.
1
Place the LT-size or A4-size paper in the cassette.
2
Press the [USER FUNCTIONS] button on the control panel to enter
the User Functions menu.
3
Press the [USER] button, and then press the [GENERAL] button on
the touch panel.
The GENERAL menu is displayed.
SETTING GENERAL FUNCTIONS 83