Toshiba e-Studio 3510C User Functions Manual page 130

4 SETTING ITEMS (ADMIN)
6
Place the printed chart face down on the glass with its bottom
toward you and its top left aligned against the original scale on the
left side, in order that the black line be placed at the left side.
7
Press the [START] button.
When the calibration setting is completed, the GENERAL menu will be displayed.
If the chart is not properly placed, the message "Set chart correctly" is displayed on the
touch panel. In this case, go back to step 6 and place the chart again.
128 SETTING GENERAL FUNCTIONS