Setting The Position Sensor Alarm; Turning Right Wrist Measurement On/Off - Omron R6 Instruction Manual

4.How to Modify the Settings
4.2

Setting the Position Sensor Alarm

1.
Press the SET button until the posi-
tion sensor alarm display (
appears on the display.
The default settings is "On1", and
this emits a series of two short blips if
your wrist is too far away from the
measuring position, and beeps
slowly when you wrist is in the cor-
rect position. When "On2" is selected
the alarm only beeps when your wrist is in the correct position.
2.
Press the MEM button to select "on1", "on2", or "OFF".
4.3 Turning Right Wrist Measurement
On/Off
1.
Press the SET button until the right
wrist measurement display (
appears on the display. Select "On"
to measure your blood pressure
using your right wrist.
2.
Press the MEM button to select "On" or "Off".
20
)
)