Setting The Advanced Positioning Sensor (Aps); Setting The Positioning Indicator - Omron BP652 Instruction Manual

SETTING THE ADVANCED POSITIONING SENSOR (APS)

You can change the options for various settings on your monitor. Pressing the SET
button to change a setting. Press the MEM button to select the options for that setting.
the power off.

SETTING THE POSITIONING INDICATOR

1. Select your User ID.
2. Press the SET button.
NOTE:
on1: After the Positioning indicator lights in blue for more than 2 seconds, or
in orange for more than 5 seconds, measurement starts automatically, even
though the monitor is not in the proper position.
on2: The Positioning indicator lights in blue for more than 2 seconds, measurement
starts automatically.
Measurement will not start if it lights in orange.
oFF: Measurement starts without the Positioning indicator.
User A User B
15