Pci/Plug And Play Setup Page - ECS 865GV-M3 Series User Manual

Motherboard User's Guide
Keyboard Power On
If you enable this item, system can automatically resume by
pressing any keys or power key on the keyboard, or typing in the
password. You must use an ATX power supply in order to use this
feature.
PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the
PCI bus and those utilizing the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Primary Graphics Adapter
Allocate IRQ to PCI VGA
PCI IDE BusMaster
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help
Primary Graphics Adapter
You can use this item to select AGP Express, OnChip VGA or
PCI as the primary graphics adapter.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA
graphics system. You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. We
recommend you to leave this item at the default value.
PCI / Plug and Play Setup
AGP Express
Yes
Disabled
F9: Optimized Defaults
34
Help Item
Select which
graphics controller
to use as the
primary boot device.