Using the Console
Screen 12: Rain Collector
Your Vantage Pro is pre-configured for the rain collector. Simply press the
DONE key to move to the next screen. You may change the rain display's units
from inches to millimeters by pressing 2ND, then the UNITS key.
Screen 13: Rain Season
Because rainy seasons begin and end at different times in different parts of the
world, you must specify the month you wish your yearly rain data to begin.
January is the default. Use the "+" and "-" arrows to select the appropriate
month.
Exiting Setup Mode
Press and hold down the DONE key to exit setup mode. The screen will return
to the current conditions screen. Re-enter setup mode at any time by pressing
and holding the DONE key, then pressing the "-" key.
Page 26
Vantage Pro Console Manual