Screen 8: Daylight Savings Settings; Screen 9: Daylight Savings Status - DAVIS Vantage Pro Console Manual

Using the Console
Note: UTC (Universal Time Coordinate) offset measures the difference between the time in any timezone
and a standard time, set by convention as the time at the Royal Observatory in Greenwich, England.
For example, Hayward, California, the home of Davis Instruments, observes Pacific Standard Time.
The UTC offset for Pacific Standard Time is -8:00, or eight hours behind Universal Time. When it's
7:00 pm (1900 hours) UT, it's 19 - 8 = 1100 hours, or 11:00 am in Hayward.
Press and release the DONE key to move to Setup screen 8.

Screen 8: Daylight Savings Settings

Use the "+" and "-" keys to choose Auto or Manual. Most users in North Amer-
ica, including Mexico (excepting Saskatchewan, Eastern Indiana, Arizona, and
Hawaii), as well as users in Australia (excepting Western Australia, Northern
Territory, and Queensland) and Europe may choose the AUTO setting. The
console is pre-programmed with appropriate starting and stopping dates for
Daylight Savings Time for the regions listed above, as long as you have entered
your correct time zone in screen 7. Users not living in the areas listed above
should choose MANUAL.
Press and release the DONE key to move to screen 9.

Screen 9: Daylight Savings Status

If you chose MANUAL in screen 8, use the "+" and "-" arrow keys to turn Day-
light Savings Time on or off on the appropriate days of the year. If you chose
AUTO in screen 8, the console will display the appropriate setting, based on
the current time and date. Press and release the DONE key to move to screen
10.
Page 24 Vantage Pro Console Manual