Table of Contents
Advertisement
Menu chart
Menu chart
You can set the basic settings for this unit in the menu settings.
Some of the menu settings cannot be changed during playback, recording, or stand-by mode for pre-alarm recording.
User Menu
User Menu (100 000 000)
1
Search
2
Copy
3
Information
D
Next
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
32
Menu
1 Select Source Device
2 Search by Time and Date
3 Search by Alarm List
D Alarm List
4 Find data storage location
D Search (Device Search List)
5 Search by Book Mark
6 Search by Motion
B Next > (Motion Detection Settings) 116 B00 000
A + D Go
E Exit
1 Copy Data to Copy 1 Drive
1 Start/End + 2 Set >
1 Start + 2 Set >
1 End + 2 Set >
2 Copy Data to Copy 2 Drive
1 Start + 2 Set >
3 Set Copy 1 Drive
4 Set Copy 2 Drive
E Exit
1 Main Storage Memory Information
2 Copy 1 Drive Information
3 Copy 2 Drive Information
E Exit
Proceeds to Setup Menu.
Menu Address
Functions
111 000 000
Selects the device to be played
back/searched.
112 000 000
Searches the desired picture by specifying the
time and date.
113 000 000
Searches the desired picture from the alarm
list registered at the start of alarm recording.
113 D00 000
Displays the list of alarm recording.
114 000 000
Detects the device which is used for recording
by inputting the recorded period.
114 D00 000
Displays the list of devices used to record for
the specified time period.
115 000 000
Searches the desired picture by specifying a
bookmark registered.
116 000 000
Searches camera picture with motions by using
motion detection function during playback.
Sets the condition for motion detection.
Sets the motion detection area manually.
Exits the Search menu.
121 000 000
Copies the data to copy 1 device by specifying the
start and end points of the data. (for short period)
121 2SE 000
Specifies the start and end points to be copied.
121 2S0 000
Specifies only the start point of copy.
121 2E0 000
Specifies only the end point of copy.
122 000 000
Copies the data to copy 2 device by specifying
only the start point of the data. (for long term)
122 2S0 000
Specifies the start point of copy.
123 000 000
Specifies the condition for copying the
recorded picture to copy 1 device.
124 000 000
Specifies the condition for copying the
recorded picture to copy 2 device.
Exits the Copy menu.
131 000 000
Shows the recorded range of each area in the
main device.
132 000 000
Shows the recorded range of each group in
copy 1 device.
133 000 000
Shows the recorded range of each group in
copy 2 device.
Exits the Information menu.
Pages
42
99
100
100
42
42
42
43
43
43
—
44
44
44
44
44,45
44,45
44
44,45
—
48
48
48
—
—
Advertisement
Table of Contents
