When Removing A Hdd - Mitsubishi Electric DX-TL5000U Installer Manual

When removing a HDD

1. Push the left end of each screw covers on both sides
step
of the cover to open.
• Do not leave the screw cover open for general use.
2. Remove the screws.
step
3. Remove the front covers.
step
• Remove the cover on the right side first.
• Then, push the left side cover to the right to
remove.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Connections
4. Remove the metal part.
step
• Remove 4 screws on the metal part.
5. Pull out the HDD tray halfway.
step
HDD A
6. Disconnect the cables.
step
7. Remove the HDD tray.
step
• Pull out the HDD tray completely.
8. Remove the HDD.
step
• Remove 4 screws which are used to fix the HDD
and its frame.
HDD B
HDD C
21