Table of Contents
Advertisement
Timer
Timer
This menu is used to program the timer and the 2 most
frequently used operation patterns. Also, by individually set-
ting recording camera, recording rate, and picture grade
for normal/alarm recording to <Set Recording Pattern A
(Normal/Timer)> to <Set Recording Pattern D (Timer)>
(Setup Menu Recording), settings can be changed in-
stantly by switching "Program Mode."
Setup Menu
2
Timer
1
Program Selection and Program Overview
2
Timer program 1 overview
3
Timer program 2 overview
2
Configure Timer Program 1
3
Configure Timer Program 2
Define Holidays
4
• Before you start recording, accurately set the present
date and time (for setting the date and time,
page 60).
(Setting the program:)
1. Select the timer program line to be set.
step
• Up to 8 programs can be set in one program
number.
Clear: Clears all the setting for the selected line.
• When the recording period of 2 or more programs
are overlapped, the higher-numbered program is
given priority for recording. (
2. Set the detailed settings for each program line.
step
2-1
Day of The Week
Set the day of the week from Sunday to Saturday.
Everyday: Records at the programmed time
everyday.
Special: Records for the period specified in special
day of the week.
Holiday: Applies holidays specified in the holiday
settings. This setting is carried out by priority,
regardless of the program number.
2-2
Time
Set the program start and end time. (The time is
indicated using the 24-hour system.)
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
56
2-3
• When you make the backup in timer recording, set
6
step
2-4
5
step
1 to 3
steps
• When the motion detection is set to "Active" in "Record
4
step
• When the trigger for alarm recording is set to "External
see
step
step
See the next page.)
• When setting the end time of the holiday program over
step
(Carrying out timer recording:)
step
Program Mode
Record A to Record D: Records by using the
cameras and rates which are set in <Set Recording
Pattern A (Normal/Timer)> to <Set Recording
Pattern D (Timer)> (Setup Menu
Copy 2: Makes the backup of the data to the copy
2 device.
Skip: Temporarily skips the recording (the recording
does not perform for the specified time period of
that program).
the start and end time so that the backup time is 10
minutes or more.
Motion Detection
Active: Performs the motion detection function
during timer recording.
Inactive: Does not perform the motion detection
function during timer recording.
A," the motion detection pattern of the alarm trigger
which is set in <Set Recording Pattern A (Normal/
Timer)> is used. When the alarm trigger is set to
"External," the motion detection recording is not
available in the timer recording even if the motion
detection is set to "Active" in timer setting.
& MD-A" or "External & MD-B," and the motion
detection for timer setting is set to "Inactive," the
recording is not started even when the ALARM IN
terminal is grounded.
3. Set the special day of the week.
• Set the start and end day of the week. The time
period between start and end day of the week
set here becomes available when setting
"Special" for "Day of The Week" on step 2-1.
4. Set the holidays.
• Set the date and month for the holiday operation.
00:00, the holiday program is executed until the set
end time, and then the program returns to the normal
program.
For example, when 01/01 is set for holiday:
From 01/01 07:00 to 02/01 06:00, program mode is set to Holiday.
From 02/01 06:00, program mode is set to the normal program.
01/01
02/01
00:00
07:00
00:00
Holiday program
5. Display the overview screen to check the timer
recording settings you have set.
6. Select the program number to be used from program
1 or 2 in the program selection.
Setup Menu
Recording).
06:00
Normal program
Advertisement
Table of Contents
