Download  Print this page

Mitsubishi Electric DX-NT400E Installation And Operation Manual

Mitsubishi dvr installation and operation manual dx-nt400e.
Hide thumbs

Advertisement

DIGITAL RECORDER
INSTALLATION AND
OPERATION MANUAL
MODEL
DX-NT400E
THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.
1

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric DX-NT400E

   Summary of Contents for Mitsubishi Electric DX-NT400E

  • Page 1 DIGITAL RECORDER INSTALLATION AND OPERATION MANUAL MODEL DX-NT400E THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.
  • Page 2: Features

    The DX- NT400E has 5 user selectable recording picture grades and 12 recording time modes. The DX-NT400E also has a built-in 4 camera multiplexer with motion detection per input. Individual field recording per input in both normal and alarm recording are supported.
  • Page 3: Caution And Care

    Caution and care HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., TV) NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT Touching the inside of the cabinet or inserting foreign objects of any kind not only creates a safety hazard but can also cause extensive damage.
  • Page 4: Table Of Contents

    Alarm recording connection ... 13 Connecting the wired remote control R-400 (supplied) . 13 Attaching and removing the HDD to the DX-NT400E ... 14-17 Attaching and removing the HDD tray ... 15 Removing the HDD tray from the recorder ... 15 Attaching the HDD tray to the recorder ...
  • Page 5 Various recordings ... 61 PRE ALARM RECORDINGS ... 61 EMERGENCY RECORDING ... 61 Various playback functions ... 62 Playing still frames ... 62 Frame-by-frame playback ... 62 Reverse playback ... 62 Speed search ... 62 Monitor display settings and playback operation ... 62 Simultaneous playback during recording ...
  • Page 6: Flowchart

    See “ Connecting the wired remote control R-400 (supplied)” on page 13. Attaching the HDD • Attach the HDD to this unit. See “ Attaching and Removing the HDD to the DX-NT400E” on pages 14 to 17. Setting up the unit • Test the HDD attached to the unit.
  • Page 7 Setting the motion detection • Select the camera number. See “ SELECTION CAMERA NUMBER” on page 38. • Set the detection areas. See “ DETECTION MASK SETTING” on page 38. • Set the sensitivity. See “ SENSITIVITY” on page 39. •...
  • Page 8: Major Operations And Their Functions

    Major operations and their functions Front view DIGITAL RECORDER DX - NT400 POWER REMOTE 1. HDD tray Attach the HDD which is commercially available to here. Due to the removable structure, you can attach or remove the HDD easily. 2. Key Used to lock the HDD tray.
  • Page 9: Rear View

    Rear view MAIN AC IN 1. MAIN switch This is the main power switch. When using this unit, set this switch to ON. Otherwise, the power cannot be turned on or off using the POWER button on the front panel. 2.
  • Page 10: Wired Remote Control R-400 (supplied)

    Major operations and their functions (continued) Wired remote control R-400 (supplied) MENU SET UP SEARCH ALARM INTERRUPT CLEAR REC/STOP REV.P PAUSE REMOTE CONTROL UNIT 1. SEARCH button Press to display the search screen. 2. SET UP button Press to display the <SETTINGS> screen. 3.
  • Page 11: Play Button

    12. TIMER ON/OFF buttons When pressing both buttons, the unit is set to timer recording/standby mode. When pressing both buttons again, timer recording/standby mode is can- celled. 13. PLAY button When pressing this button during stop mode, the playback speed changes in the 4 grades (normal } 25 fields/second } 30 MB units } 300 MB units} normal).
  • Page 12: Connections

    Connections Connecting to CCTV camera, monitor, and sensor To AUDIO OUT connector MAIN AC IN POWER CORD for the Continent for U.K ALARM IN Input terminal • Input Circuit 0.047 F Input terminal <Interface circuit inside the unit> ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• To AUDIO IN connector To VIDEO IN connector To VIDEO OUT...
  • Page 13: Alarm Recording Connection

    Alarm recording connection Example: The diagram below shows an example of connection for alarm signals corresponding to camera number 1. RESET AUDIO ALARM SWITCH Connecting the wired remote control R-400 (supplied) DIGITAL RECORDER DX - NT400 POWER REMOTE To REMOTE jack ZOOM MENU SPLIT/...
  • Page 14: Attaching And Removing The Hdd To The Dx-nt400e

    Attaching and removing the HDD to the DX-NT400E Make sure that the POWER button on the front panel and the MAIN switch on the rear panel are both turned OFF when attaching or removing the HDD tray. Do not remove the top cover of the unit.
  • Page 15: Attaching And Removing The Hdd Tray

    Attaching and removing the HDD tray Removing the HDD tray from the unit 1. Put the key into the unit and turn it clockwise. • The lever on the unit is unlocked. 2. Move the lever to the left. • The HDD tray is unlocked and ejected.
  • Page 16: Attaching The Hdd To The Hdd Tray

    Attaching and removing the HDD to the DX-NT400E (continued) Attaching the HDD to the HDD tray When attaching one HDD: 1. Remove the top cover from the HDD tray. • Remove the 2 screws and lift the top cover. 2. Remove the HDD holder on the right side of the HDD tray.
  • Page 17: When Attaching Additional Hdd

    8. Attach the top cover of the HDD tray. • To attach the top cover, put the hooks of the top cover in the openings of the HDD tray. • Use the 2 screws that were removed in step 1. •...
  • Page 18: Hdd Self Test

    HDD SELF TEST HDD SELF TEST Before using the HDD attached to this unit, test the HDD whether to be used correctly. There are 3 types of the test method and choose one in the <HDD SELF TEST> screen. When choosing, refer to the table below which describes the details of each method.
  • Page 19: Hdd Self Test

    1. Attach the HDD to the unit, and connect the cameras, the monitors, and the wired remote control ( 17). 2. Turn on the MAIN switch on the rear panel and wait until the ACCESS indicator is turned off. 3. Make sure that the POWER button on the front panel is turned off.
  • Page 20: Auto Set Up

    AUTO SET UP AUTO SET UP AUTO SET UP is displayed, in order to set up an indispensable function, when this unit is turned on for the first time. Only when the unit is turned on for the first time, the AUTO SET UP screen is displayed automatically.
  • Page 21: Initialization

    9. Press the ENTER button. • The background of the setting item turns red and flashes. 10. Press the JOG buttons to display the desired setting and then press the ENTER button. • The setting item is determined and flashing stops. 11.
  • Page 22: Basic Operations

    Basic operations Multiplexer functions SPLIT/SINGLE, ZOOM, +, – and JOG buttons are used to perform some of the multiplexer functions. Multiplexer operation Each time you press the SPLIT/SINGLE button, the screen display is switched between the single screen display and the split/sequential screen display.
  • Page 23: To Return To A Normal Screen From A Menu Screen

    6. Press the ENTER button. • The setting item is determined and flashing stops. • To continue with other settings, repeat steps 4 to 6. <TIME DATE/DISPLAY SETTINGS> TIME DATE ADJUST >>DISPLAY MODE CLOCK LOCATION SETTING CAMERA DISPLAY CAMERA TITLE/MEMO SETTING DUPLEX MODE DISPLAY <MODE 3>...
  • Page 24: Time Date Adjust

    Basic operations (continued) TIME DATE ADJUST Before you start recording, it is necessary to set accurately the present date and time. Example: Setting the date/time to 10/28/2003 6:30pm (18:30). (default: “01/01/2003 00:00:00”) 1. Press the SET UP button to display the <SETTINGS> screen.
  • Page 25: Basic Manual Recording

    Basic manual recording Normal recording using manual operation is described below. Before you start recording, check the settings of “HDD REPEAT REC MAIN” and “HDD REPEAT REC SUB” in the <HDD SETTINGS> screen ( then set the recording settings. Settings here are for normal recording only. For timer recording, settings must be made on the <TIMER PROGRAM SETTINGS>...
  • Page 26: Setting The Recording Interval And Recording

    Basic operations (continued) 7. Press the JOG button to highlight the setting item of “GRADE” and then press the ENTER button. • The background of the setting item turns red and flashes. <RECORD SETTING> GRADE A-PPS 1.25P 3.125P STD 3.125P STD 3.125P STD The menu screen is not cleared even when pressing the SET UP button while the setting item is...
  • Page 27 3. Press the JOG buttons to display “03” for “DAY” and then press the ENTER button. • Setting item is determined and flashing stops. 4. Press the JOG button to highlight “MONTH” and then press the ENTER button. • The background of the setting item turns red and flashes. 5.
  • Page 28: Language Selection

    Basic operations (continued) 14. Press either the PLAY button or the PAUSE button to playback the searched image. For playback, see “Various playback functions” on page 62. 15. To stop playback/still frame playback, press the STOP button. • The display returns to the normal screen. LANGUAGE SELECTION With this unit, the menu screen display can be selected from six languages.
  • Page 29: Menu Functions

    Menu functions MENU SETTING You can set the basic settings for this unit in the menu setting. Refer to pages shown below for details. During playback, recording, and pre-alarm recording stand-by mode, you cannot change some of the menu settings. SET UP button MAIN MENU SUB MENU (1)
  • Page 30: Main Menu

    Menu functions (continued) SET UP button MAIN MENU <SETTINGS> >>TIME DATE/DISPLAY SETTINGS MPX DISPLAY SETTINGS MOTION DETECTION SETTINGS RECORD SETTINGS TIMER PROGRAM SETTINGS INITIAL SET UP/INFORMATION MEMO: CAUTION: For <ESTD REC>, see “Continuous recording time table” on page 77. *1: displays when PARTITION is performed. •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••...
  • Page 31 SET UP button MAIN MENU <SETTINGS> >>TIME DATE/DISPLAY SETTINGS MPX DISPLAY SETTINGS MOTION DETECTION SETTINGS RECORD SETTINGS TIMER PROGRAM SETTINGS INITIAL SET UP/INFORMATION MEMO: SUB MENU (1) SUB MENU (2) <INITIAL SET UP/INFORMATION> <HDD SETTINGS> >>HDD SETTINGS >>HDD REPEAT REC MAIN AUDIO RECORDING HDD REPEAT REC SUB REAR TERMINAL SETTINGS...
  • Page 32 Menu functions (continued) SET UP button MAIN MENU <SETTINGS> >>TIME DATE/DISPLAY SETTINGS MPX DISPLAY SETTINGS MOTION DETECTION SETTINGS RECORD SETTINGS TIMER PROGRAM SETTINGS INITIAL SET UP/INFORMATION MEMO: button + POWER button <INITIALIZATION> >>HDD SETTING PARTITION PARTITION SIZE BOOT UP DELAY POWER OFF INITIALIZATION ALL DATA WILL BE ERASED...
  • Page 33: Search Selection Menu

    SEARCH SELECTION MENU SEARCH button MAIN MENU <TIME DATE SEARCH> >>01-01-2003 00:00:00 EXECUTE(FORWARD) MAIN START ---------- --:--:-- ---------- --:--:-- PUSH SEARCH KEY FOR SEARCH SELECTION <TIME DATE SEARCH> Pages 26 to 28 <INDEX SEARCH> >>INDEX EXECUTE(FORWARD) EXECUTE(REVERSE) MAIN START ---------- --:--:-- ---------- --:--:-- PUSH SEARCH KEY FOR SEARCH SELECTION...
  • Page 34: Time Date/display Settings

    <TIME DATE/DISPLAY SETTINGS> TIME DATE ADJUST See page 24. DISPLAY MODE This item is used to set the display format of the date and present time. <TIME DATE/DISPLAY SETTINGS> TIME DATE ADJUST >>DISPLAY MODE CLOCK LOCATION SETTING CAMERA DISPLAY CAMERA TITLE/MEMO SETTING DUPLEX MODE DISPLAY <MODE 1>...
  • Page 35: Camera Title/memo Setting

    Example: Setting titles of “ENTRANCE” and “COUNTER” to camera number “ ” and “ ,” respectively, and setting memo of “BANK.” 1. Press the SET UP button } <SETTINGS> } Select “CAMERA TITLE/MEMO SETTING” in the <TIME DATE/ DISPLAY SETTINGS> screen and then press the ENTER button.
  • Page 36: Mpx Display Settings

    <MPX DISPLAY SETTINGS> The multiplexer function of this unit allows the connected camera video to be displayed in the splited screen. It is also possible to set the order of the camera number to be displayed. For basic operations of the multiplexer, page 22.
  • Page 37: Split4 Screen Setting

    SPLIT4 SCREEN SETTING This menu is used to set the camera number to be displayed in the screen splited in 4. 1. Press the SET UP button } <SETTINGS> } Select “SPLIT4 SCREEN SETTING” in the <MPX DISPLAY SETTINGS> screen and then press the ENTER button. •...
  • Page 38: Motion Detection Settings

    <MOTION DETECTION SETTINGS> This menu is used to set the conditions of the motion detection function for alarm recording which is started when detecting motion within the video of the connected camera. SELECTION CAMERA NUMBER This item is used to set the camera number for which motion detection function is executed.
  • Page 39: Sensitivity

    SENSITIVITY This item is used to set the sensitivity of detecting the changes of the loaded video data. Video data is sampled every 0.5 second and compared with each video data of 0.5 second before for each camera. The sensitivity setting is divided into the 5 levels of difference in brightness.
  • Page 40: Md Lock Out Time

    <MOTION DETECTION SETTINGS> (continued) MD LOCK OUT TIME This item is used to restrict motion detection function in order to control the recording to prevent the continuous recording of the same image. Once the unit detects motion and starts alarm recording, the unit ignores the input of mortion detection for the time period set in the MD LOCK OUT TIME.
  • Page 41: Record Settings

    <RECORD SETTINGS> Settings concerning normal recording and alarm recording This unit allows you to set the setting items for normal recording and alarm recoding individually. It means, more detailed settings are possible, such as changing the recording intervals of the camera which inputs the alarm signals while leaving the normal recording settings as they are.
  • Page 42: Alarm Type

    <RECORD SETTINGS> (continued) ALARM TYPE This item is used to set the camera selection during alarm recording. <ALARM SETTING> ALARM RECORD CAMERA - -- -- - 1 2 3 >>ALARM TYPE <RECORD SETTING> GRADE A-PPS 3.125P STD 3.125P STD 3.125P STD 3.125P STD >>ALARM TYPE PRE ALARM REC...
  • Page 43: Pre Alarm Rec

    PRE ALARM REC This item is used to set the pre-alarm recording. <RECORD SETTING> GRADE A-PPS 3.125P STD 3.125P STD 3.125P STD 3.125P STD 3.125P STD 3.125P STD 3.125P STD 3.125P STD ALARM TYPE >>PRE ALARM REC CLEAR:BACK <ESTD REC> Setting (default: “OFF”) “OFF,”...
  • Page 44: Timer Program Settings

    <TIMER PROGRAM SETTINGS> TIMER PROGRAM SETTINGS This menu is used to set up to 3 most frequently used operation patterns. By individually setting the recording camera, recording interval, and recording picture quality for normal recording/alarm recording to REC MODE A to REC MODE D, settings can be changed instantly by switching REC MODE.
  • Page 45 7. Press the JOG button to highlight the setting item of “hour” of the start time and then press the ENTER button. • The background of the setting item turns red and flashes. 8. Press the JOG buttons to display “12” and then press the ENTER button.
  • Page 46: Holiday Setting

    <TIMER PROGRAM SETTINGS> (continued) HOLIDAY SETTING This menu is used to set holidays throughout the year. <HOLIDAY SETTING> --/-- --/-- --/-- --/-- --/-- --/-- --/-- --/-- --/-- --/-- --/-- --/-- --/-- --/-- --/-- DAY/MONTH 1. Press the SET UP button } <SETTINGS> } Select “HOLIDAY SETTING”...
  • Page 47: Initial Set Up/information

    <INITIAL SET UP/INFORMATION> HDD SETTINGS HDD REPEAT REC MAIN/HDD REPEAT REC This item is used to set the operation when HDD space becomes full during recording. <HDD SETTINGS> >>HDD REPEAT REC MAIN HDD REPEAT REC SUB HDD REPEAT PLAY IM-CHECK PLAY SEQUENTIAL PLAY “HDD REPEAT REC SUB”...
  • Page 48: Sequential Play

    <INITIAL SET UP/INFORMATION> (continued) When executing complex playback operations with the PLAY or REV.P button during alteration check, the “IMAGE MODIFIED” warning may appear. Execute alteration check during normal playback. IMAGE MODIFIED( SEQUENTIAL PLAY This item is used to make backups of the video recorded with this unit to an analog video recorder etc.
  • Page 49: Rear Terminal Settings

    REAR TERMINAL SETTINGS MODE OUT 1 to MODE OUT 5 These items are used to output the status of this unit from the MODE OUT terminals on the rear panel. There are 5 MODE OUT terminals. Set output type for each terminal individually.
  • Page 50: Buzzer

    <INITIAL SET UP/INFORMATION> (continued) Setting (default: “OFF”) “OFF,” “REMAIN,” “WARNING,” “ALARM” SETTING REMAIN BUZZER When reaching the remaining capacity set in “REMAIN HDD” When a failure occurs and a warning is displayed When an alarm recording or emergency recording is started 1.
  • Page 51: Emergency Rec Duration

    INFORMATION For the relationship between the warning display and CALL OUT signal output, see page 81. The warning display of the item written “Fixed” in the CALL OUT output column displays unconditionally. For the item written “Selectable” in the CALL OUT output column, you can set the condition that CALL OUT signal is output.
  • Page 52: Ethernet

    <INITIAL SET UP/INFORMATION> (continued) Setting of “TRANSMISSION MODE” (default: “9600”) “1200,” “2400,” “4800,” “9600,” “19200” Setting of “DATA BIT LENGTH” (default: “8BIT”) “8BIT,” “7BIT” Setting of “PARITY BIT” (default: “NONE”) “NONE,” “ODD,” “EVEN” Setting of “STOP BIT LENGTH” (default: “1BIT”) “1BIT,”...
  • Page 53 <SERVICE PORT SETTING> >>WEB USER ACCESS SUPER USER LIVE USER1 LIVE USER2 LIVE USER3 LIVE USER4 2. Press the JOG buttons to select the desired setting and then press the ENTER button. • The first figure of the port number is highlighted. 3.
  • Page 54: Information/service

    <INITIAL SET UP/INFORMATION> (continued) INFORMATION/SERVICE This menu is used to check the log list or list of power failures, etc., and to initialize the menus. At the bottom of the screen, the following information appears. • The accumulated operation time since the beginning of usage (“ELAPSED TIME”) •...
  • Page 55: Main Hdd Data Clear/sub Hdd Data Clear

    MAIN HDD DATA CLEAR/SUB HDD DATA CLEAR This menu is used to erase the data recorded on the MAIN HDD or SUB HDD. <MAIN HDD DATA CLEAR> PUSH WARNING RESET KEY FOR 3 SECOND TO CLEAR <SUB HDD DATA CLEAR> PUSH WARNING RESET KEY FOR 3 SECOND TO CLEAR When executing “MAIN HDD DATA CLEAR”...
  • Page 56 <INITIAL SET UP/INFORMATION> (continued) To register the PASSWORD • • • Register a 4-digit number for PASSWORD. When setting the number of each digit, choose the number from 0 to 9. 1. Press the SET UP button } <SETTINGS> } Select “PASSWORD”...
  • Page 57: Language Selection

    6. Press the JOG buttons to move the cursor to “EXECUTE” and then press the ENTER button. • The normal screen appears. 7. (To release the PASSWORD LOCK of level 3 • • • ) After following steps 1 to 6 to release the PASSWORD LOCK of levels 1 and 2, press the SET UP button.
  • Page 58: Operation Examples

    Operation examples Operation example 1 Setting different number of cameras to REC MODE A and B for normal recording to switch cameras depending on the time period and day of the week. For loading of camera video, of recording operation to the number of cameras and recording interval settings”...
  • Page 59: Operation Example 2

    Operation example 2 Setting the holiday. < Operation > • REC MODE A (normal recording with all the cameras) is set to Monday to Friday from 08:00 to 15:00, and REC MODE B (normal recording with camera numbers “ “ ”) is set from 15:00 to 20:00.
  • Page 60: Operation Example 3

    Operation examples (continued) <MOTION DETECTION SETTINGS> >>SELECTION CAMERA NUMBER DETECTION MASK SETTING SENSITIVITY MOTION THRESHOLD TEST MODE MD LOCK OUT TIME 4) <TIMER PROGRAM SETTINGS> screen setting ( see pages 44 to 46) • SELECTED PATTERN: “P3” • ALARM REC DURATION: “5M” <TIMER PROGRAM SETTINGS>...
  • Page 61: Various Recordings

    Various recordings PRE ALARM RECORDINGS During alarm recording, recording starts a few seconds before the ALARM IN terminal is grounded or motion is detected. For details concerning pre-alarm recording settings, see “Recording mode settings A to D for normal recording and alarm recording” on page disturbance Alarm input Time...
  • Page 62: Various Playback Functions

    Various playback functions Playing still frames 1. Press the PAUSE button during playback. • The unit switches to still frame playback. Press the PAUSE button again or press the PLAY button to resume playback. Frame-by-frame playback 1. Press the JOG buttons during still frame playback.
  • Page 63: Various Search

    Various search The various search functions of this unit can be used to skip to the desired video. SEARCH SELECTION The search screen appears when the SEARCH button is pressed. When pressing the SEARCH button again, the <SEARCH SELECTION> screen appears to select the playback device, search type, and the camera number to be searched.
  • Page 64: Index Search/alarm Index Search

    Various search (continued) INDEX SEARCH/ALARM INDEX SEARCH Index signals are automatically written to the HDD at the start point of each recording. It is possible to search these signals and start playback from such index point. There are 2 types of index search: •...
  • Page 65: Alarm Skip Search

    6. To stop playback or still-frame playback, press the STOP button. During still frame playback, to choose the desired video from the SPLIT4 screen display and display the video of that camera number in the single screen display, press the SEARCH button to clear the search screen first, and then press the SPLIT/SINGLE button and the +, –...
  • Page 66: Alarm List Search

    Various search (continued) ALARM LIST SEARCH This unit stores the start times of alarm recording and emer- gency recording in the alarm list when such recording is started. It is possible to perform the index search for the desired time (or the closest time) from the alarm recording (or emergency recording) start times listed in the alarm list.
  • Page 67: Start/end Search

    START/END SEARCH It is possible to search the recording start/end point of the playback device selected in <TIME DATE SEARCH>, <IN- DEX SEARCH>, and <ALARM INDEX SEARCH>. 1. Press the SEARCH button. • The search screen selected in “SEARCH TYPE” appears. 2-1.
  • Page 68: Other Convenient Functions

    Other convenient functions Power failure compensation circuit The unit is equipped with an internalized power failure compensation circuit. When the unit has been charged for 48 hours (full), the date, time, timer record settings, and menu settings are kept up to 1 month without power. The accuracy of the time will decline if the power plug is not connected to the wall outlet for extensive period.
  • Page 69: Hdd Setting

    HDD SETTING On this unit, you can select “MIRRORING” or “PARTITION” for the HDD recording mode ( see page 21). Setting (default: “NORMAL”) “NORMAL,” “MIRRORING,” “PARTITION” MIRRORING This item is used to record the same data on 2 HDDs of the same capacity in order to reduce the risk of data loss due to an HDD crash.
  • Page 70: Partition/partition Size

    Other convenient functions (continued) PARTITION/PARTITION SIZE This item is used to set an independent partition in HDD as sub-device capacity for alarm recording. In the MAIN HDD, normal recording and alarm recording are stored. 1. Turn ON the MAIN switch on the rear panel, and wait until the ACCESS indicator turns off.
  • Page 71: Communications By Web Brouser

    Communications by Web Browser Communications by Web Browser This unit can communicate with a PC via Web browser. Live and pre-recorded images can be viewed from this mode. The personal computer product requirements • OS: Microsoft Windows 98SE, Windows 2000, Windows ME or Windows XP.
  • Page 72: Authentication

    Communications by Web Browser (continued) 3-1. (If you make an error in entering the userID or password • • • ) • The “[Rejection]” screen appears. 3-2. Select “[Back to Authentication]” and either left-click or press ENTER. • The “[Authentication]” screen appears. 3-3.
  • Page 73 <Function description> STOP : Stops the retrieval of an image. : Starts (or restarts) the retrieval of an image. Display : For selecting either the display or non-display of a camera number. Layout : For selecting from the 2 types of display patterns.
  • Page 74 Communications by Web Browser (continued) : Press to start reverse playback. : Press to start speed searches in the reverse direction at speeds of x2, x4, x8 and x16. : Press to frame-by-frame playback in the reverse direction. : During playback or searching, press to stop playback for still frame.
  • Page 75 <User authorization> Live Monitor: Allows acquisition of live images. It is a mandatory to register. Play Mode: Allows acquisition of recorded images. Playmode, control from one user. All Camera: Allows the acquisition of images from a covert cam- era. Change Password: Allows the changing of user’s password.
  • Page 76 Communications by Web Browser (continued) 3. Confirm that the desired time is set. • Log out In this screen, assign “log out” settings to end the job. 1. Select “log out” and left-click. • The “[log out]” screen appears. 2. Close the Web Browser. If the browser is closed without correctly operat- ing the log out, the user’s sessionID will be saved for 5 minutes.
  • Page 77: Recording Time Table

    Recording time table Continuous recording time table HDD continuous recording time (for 240 GB drive) Displays the estimated recordable time (when recording on a 240 GB (4R120L0 120 GB x 2) HDD). The following table shows estimated recordable time when operating with one camera and the recording interval is set at a constant PPS rate given at the top of the column.
  • Page 78: Without Audio Recording, Recording Duration "medium

    Recording Time Table (continued) • Without Audio recording, recording duration “MEDIUM” 12.5P GRADE SUPER 1.7s 3.5s HIGH 2.3s 4.6s 3.7s 7.5s BASIC 5.2s LONG • Without Audio recording, recording duration “SHORT” 12.5P GRADE SUPER 0.8s 1.7s HIGH 1.1s 2.3s 1.8s 3.7s BASIC 2.6s...
  • Page 79: Troubleshooting

    Troubleshooting If problems with the unit persist even after you’ve followed the suggestions below, please disconnect the power cord and contact the retailer from whom you purchased the unit. Description of problem The unit is not turned on. • Is the power cord properly plugged in? •...
  • Page 80: Troubleshooting

    Troubleshooting (continued) Description of problem The unit does not perform the motion detection function. The unit does not respond to PC control. There is a camera number with a blue screen during split screen display. Button operation is not working. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••...
  • Page 81: Warnings And Call Out Output

    Warnings and CALL OUT output Warnings and their appropriate countermeasures #1 Options in the CALL OUT output column: • Selectable : selects to output CALL OUT signal or not on the menu screen. • Fixed : outputs CALL OUT signal from the CALL OUT terminal regardless of the menu setting. •...
  • Page 82: Glossary

    Glossary Glossary • I/O terminals Terms used for referring to both input and output. • RS-232C Connection standard used for handling data between de- vices such as a PC, modem, etc. A standard when con- necting a PC and modem. The upper limit for the commu- nication speed of this standard is 115.2 kbps and the maxi- mum transfer distance is 15 m.
  • Page 83: Specifications

    Specifications Rated Power Supply: AC 100 - 240 V 50/60 Hz Rated Input: 0.4 - 0.2 A (100 - 240 V) (with 2 HDDs described on page 14 attached ) Color System: PAL-type color system Operating Temperature: 5 C to 40 C Relative Humidity: Max.
  • Page 84 Others DEUTSCH STELLEN SIE NIEMALS SCHWERE GEGENSTÄNDE AUF DEN REKORDER (z. B. EIN FERNSEHGERÄT) STECKEN SIE NIEMALS GEGENSTÄNDE IN DEN REKORDER Gegenstände, die innen am Gehäuse anstoßen, oder alle eingesteckten Fremdkörper sind nicht nur gefährlich sondern verursachen auch große Beschädigung. SCHÜTZEN SIE DAS NETZKABEL Ein defektes Netzkabel kann Brand oder elektrischen Schlag verursachen.
  • Page 85 Others (Continued) FRANÇAIS INTERDICTION DE POSER DES OBJETS LOURDS SUR LE ENREGISTREUR (PAR EX: TÉLÉVISEUR) INTERDICTION DE TOUCHER L’INTÉRIEUR DE L’ENREGISTREUR ET D’Y INTRODUIRE TOUT CORPS ÉTRANGER Tout contact avec l’intérieur du boîtier ou toute introduction de corps étranger peut non seulement constituer un danger mais peut également entraîner d’importants dégâts.
  • Page 86 CASTELLANO NO COLOQUE NUNCA OBJETOS PESADOS SOBRE LA UNIDAD (P.E. TV) NO TOCAR NUNCA NI INSERTAR OBJETO ALGUNO EN EL INTERIOR DEL UNIDAD El tocar el interior de la caja o el insertar objetos extraños de cualquier clase no sólo crea peligros a la seguridad del usuario sino que también será...
  • Page 87 Others (Continued) ITALIANO NON COLLOCARE SULL’UNITÀ OGGETTI PESANTI (es. apparecchio TV) NON TOCCARE E NON INSERIRE OGGETTI ALL’INTERNO DELL’UNITÀ Toccare all’interno del mobiletto che contiene l’unità o inserire oggetti estranei, di qualsiasi tipo, oltre ad essere causa di pericolo per la sicurezza può condurre a danni onerosi. PROTEGGERE IL CAVO DI ALIMENTAZIONE ELETTRICA Il danneggiamento del cavo di alimentazione elettrica può...
  • Page 88 NEDERLANDS ZET IN GEEN GEVAL ZWARE VOORWERPEN BOVENOP DIT TOESTEL (BIJV. TV.) RAAK IN GEEN GEVAL ENIG VOORWERP IN HET TOESTEL AAN EN STEEK ER NIETS IN Aanraken van het binnenwerk, of naar binnen steken van voorwerpen die daar niet in thuishoren kan niet alleen gevaar opleveren, maar ook ernstige schade veroorzaken.
  • Page 89 Others (Continued) PORTUGES OBJETOS PESADOS NUNCA DEVEM SER COLOCADOS EM CIMA DO APARELHO (POR EX., TV) NÃO MEXA DENTRO DO APARELHO NEM INSIRA NELE QUALQUER OBJETO Tocar a parte interna do gabinete ou inserir objetos estranhos de qualquer natureza além de provocar um risco em termos de segurança, podem causar danos consideráveis ao aparelho.
  • Page 90 SVENSKA TUNGA FÖREMÅL (T EX EN TV) FÅR ABSOLUT INTE PLACERAS OVANPÅ ENHETEN RÖR INTE VID INSIDAN AV ENHETEN OCH STOPPA INTE IN NÅGRA FÖREMÅL I ENHETEN Om du rör vid insidan av skåpet eller stoppar in främmande föremål utsätter du inte bara dig själv för fara, utan kan även orsaka omfattande skador på...
  • Page 91 Others (Continued) РУССКИЙ ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Others...
  • Page 92 Mitsubishi Electric Europe B.V. UK Branch Office Visual Information Systems Division Travellers Lane Hatfield Herts AL10 8XB Telephone: +44 (01707) 278 684 Fax: +44 (01707) 278 541 GERMANY Mitsubishi Electric Europe B.V. German Branch Office Electric Visual Systems Gothaer Str. 8 40880 Ratingen Germany Telehone: +49 (2102) 486-9250 Fax: +49 (2102) 486-7320 SPAIN...

This manual is also suitable for:

Dx-nt400e

Comments to this Manuals

Symbols: 0
Latest comments: