System Menu; Com/Lan; Rs-232C Setting; Rs-485 Cascade Setting - Mitsubishi Electric DX-TL5000U Installer Manual

COM/LAN

This menu is used to set the communication settings be-
tween this unit and the external device connected.

RS-232C Setting

This item is used to remotely control this unit via a PC con-
nected to the RS-232C terminal.

System Menu

1 COM/LAN
1 RS-232C Setting
1. Select the communication mode.
step
Remote A: Controls this unit via a PC and this unit
returns every status information.
Remote B: Controls this unit via a PC and this unit
returns only the response to the command code.
Remote C: Controls this unit via a PC and this unit
returns nothing.
Off: Does not control this unit via a PC.
2. Set the port settings shown below.
step
• Transmission mode
• Data bit length
• Parity bit
• Stop bit length
• Delimiter
• Set all the settings to the same values as the PC
connected.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
74

RS-485 Cascade Setting

This item is used to make the settings for the cascade func-
tion using the recorders connected via the RS-485 termi-
nal.
System Menu
COM/LAN
1
2 RS-485 Cascade Setting
1. Select the cascade connection mode of this unit.
step
Standalone: Does not perform the cascade
function.
Cascade: Performs the cascade function.
2. Select the recorder address.
step
Master ID:01: Sets this unit as the master recorder
for the cascade function.
Slave ID:01 to 16: Sets this unit as the slave
recorder for the cascade function.
• "Recorder Address" displays only when the "Cascade
Connection Mode" is set to "Cascade."
• Do not set cascade address which is overlapped with
that of other recorders.
• When operating cascade function via keyboard, set
all the recorders to slave. (When there is the recorder
of which cascade address is "Master ID:01," the
cascade function may not operate correctly.)
System Menu